How to Replace Fan Spider on Large Ceiling Fans

By We re still here！ | Published: 2026-10-25

Category: How-to Guides

Step-by-step guide to replacing the fan spider on 72-96 inch ceiling fans. Includes tools needed, common mistakes, and compatibility tips for ICF72, ICF88, and ICF96 models.

Quick answer

Replace a damaged fan spider on your 72-96 inch ceiling fan by twisting the new spider onto the motor head and securing it with a Phillips screwdriver. This guide walks you through each step and highlights common pitfalls.

When to replace the fan spider

The fan spider connects the fan blades to the motor head. If you notice wobbling, unusual noise, or visible cracks in the spider, it's time for a replacement. Operating a fan with a damaged spider can lead to unsafe blade movement or further damage to the motor.

This replacement is only compatible with our 72-inch, 88-inch, and 96-inch ceiling fans with model numbers starting with ICF72, ICF88, or ICF96. Verify your fan model before purchasing.

Tools you will need

You only need a Phillips screwdriver and a stable ladder. No specialized tools are required. The replacement spider twists onto the motor head, so you won't need to remove the entire fan assembly.

Step-by-step replacement process

1. Turn off power and remove blades: Switch off the fan at the wall switch and circuit breaker. Use a ladder to access the fan. Remove the screws holding each blade to the spider and set the blades aside. Common mistake: leaving the power on. Always verify the fan is off before touching any wiring or moving parts.
2. Unscrew the old spider: Locate the screws securing the old spider to the motor head. Use your Phillips screwdriver to remove them. The spider should then twist off the motor head. If the spider is stuck, do not force it. Check for hidden screws or corrosion. Apply gentle twisting pressure.
3. Attach the new spider: Twist the new spider onto the motor head until it sits flush. Align the screw holes and insert the screws. Tighten them with the Phillips screwdriver until snug, but do not overtighten. Overtightening can strip the threads or crack the spider. Stop when the spider is secure and does not wiggle.
4. Reattach the blades and test: Screw each blade back onto the new spider. Restore power and turn on the fan. Let it run at low speed and listen for any wobble or noise. If the fan runs smoothly, the replacement is complete. If wobbling persists, double-check that all screws are tight and the spider is fully seated on the motor head.

Product details

Fan Spider for 72 - 96 In. Ceiling Fans (ICF72/ICF88/ICF96): Replace a damaged spider to keep your fan performing safely and efficiently. Twists onto motor head and is fastened with a Phillips screwdriver to secure. This means you can complete the repair with basic tools and without disassembling the entire fan, saving time and effort.
Fan Spider for 72 - 96 In. Ceiling Fans (ICF72/ICF88/ICF96)