Cradle Component Kit for 24 In. Direct Drive Drum Fans: What's Inside
By We re still here！ | Published: 2026-10-31
Category: Product Reviews
A practical buyer's guide to the cradle component kit for 24 in. direct drive drum fans: what the kit contains, which models it fits, and when replacing the cradle is the right repair.
Quick answer
Buy the Cradle Component Kit for 24 In. Direct Drive Drum Fans when your fan's base no longer holds the drum steady and your model starts with BF24BA or BF24TF. It supplies the two cradles, star knobs, carriage bolts with washers, and bottom channel brace needed to rebuild that tilt base.
Why the cradle, not the whole fan, is usually the part to replace
On a 24 in. direct drive drum fan, the cradle is the pivot hardware that connects the drum to the base. It carries the tilt adjustment, so it takes the wear from repeated repositioning and from any wobble at high speed. When the knobs stop locking or the cradles loosen, replacing the cradle components restores a stable base without touching the motor or blades.
That makes this kit a targeted repair rather than a cosmetic upgrade. If the fan still runs but will not stay where you aim it, the base hardware is the first thing to inspect.
What the kit does not include
The catalog lists cradles, star knobs, carriage bolts with washers, and a bottom channel brace. It does not list the fan's drum, motor, blades, or power cord, so do not expect this kit to fix an electrical fault, a bent blade, or a cracked drum housing. If your fan has those problems, this cradle kit alone will not complete the repair.
The model exclusion that matters most
The kit is for 24 in. drum fans only, and it is compatible with models beginning in BF24BA and BF24TF, excluding 3-speed NP (narrow profile) units. The narrow-profile exclusion is easy to miss because those fans are still 24 in. units. Check the model plate before ordering; if your fan is an NP unit, this kit is not the correct part.
Decision rules for buying the cradle kit
- Confirm the drum size: Measure the fan drum or check the model plate for a 24 in. size. This kit is for 24 in. drum fans only, so a 30 in. or other size fan needs a different part. If the size is not clearly 24 in., stop and identify the fan first.
- Match the model prefix: Look for a model beginning in BF24BA or BF24TF. Those are the model families this cradle kit is compatible with.
- Rule out narrow-profile units: If the model is a 3-speed NP (narrow profile) unit, do not order this kit even though the fan is 24 in. The catalog excludes those units. The NP exclusion overrides the size match.
- Check the symptom against the kit contents: Order the kit when the base will not hold steady, the tilt knobs will not lock, or the cradles are loose or damaged. If the fan has an electrical, blade, or drum-housing fault, this kit will not address it.
Product facts
- Cradle Component Kit for 24 In. Direct Drive Drum Fans: The kit includes 2 cradles, 2 star knobs, 2 carriage bolts with washers, and the bottom channel brace. You get the full set of base pivot hardware in one order, so you are not hunting for a missing knob or bolt separately.
Cradle Component Kit for 24 In. Direct Drive Drum Fans
Who this cradle kit is for
Best for
- Owners of 24 in. direct drive drum fans with model prefixes BF24BA or BF24TF whose base no longer holds steady
- Repairs where the tilt knobs, cradles, or bottom channel brace are worn or missing
Not for
- 3-speed NP (narrow profile) 24 in. drum fans, which the catalog excludes
- Fans in other drum sizes or model families, or fans with motor, blade, or cord faults
